How do I clean epoxy resin tools? (spatulas, mixing cups, bowls, etc.)

Clean up is never fun. You have the options of using chemicals or nonchemical methods.

NON- CHEMICAL METHOD

Tools -

•  wax paper non- stick cooking spray    
•  dish soap
•  paper towels

Steps -
1. Lay wax paper down as a base where to clean your tools
2. While the resin is still wet scrape as much material as you can from the surface using a paper towel ( from all the tools that you have used)
3. Spray the nonstick cooking spray into the measuring cups and then add dish soap as well
4. With your brush stir making sure that you scrape all sides
5. Wipe the measuring cup and the brush tools that you have used) with a paper towel
6. Rinse them with warm water and soap
7. Dry all tools with paper towels - once thoroughly dry they are ready for reuse!

USING- THINNER, ACETONE OR ALCOHOL

Tools -

• thinner or acetone or alcohol (follow safety warnings on solvents and provide adequate ventilation)
• clean cloth or paper towel

Steps -
1. With whatever solvent you decided to use wipe down tools of excessive material
2. Wash materials with soap and hot water (this works with plastic stir sticks, epoxy resin spreaders and mixing cups)

CAUTION -
Dispose of empty containers safely

DO NOT dispose of epoxy resin or hardener in a liquid state

Link for proper Recycling techniques: https://promarinesupplies.com/blogs/general-faqs/how-to-recycle-pro-marine-supplies-epoxy