Many of our customers create amazing river tables! Keep in mind the maximum depth to pour is approximately 1/8”- 1/4" thick. If depths thicker than 1/8”- 1/4" are desired, multiple coats are necessary. You must wait at least 4 to 10 hours between coats to allow sufficient curing and cooling. Attempting to pour thicker can cause the epoxy to generate excessive heat which in turn will cause more air bubbles, possibly cracking and shrinkage. You will be able to pour up to unlimited depths if you follow the instructions.
Articles in this section
- Does Temperature Affect Table Top Epoxy?
- Why Epoxy Hardener turned yellow in the bottle?
- How do I clean epoxy resin tools? (spatulas, mixing cups, bowls, etc.)
- What is the working time/pot life of Table Top Epoxy?
- How Does Cold Weather Affect Epoxy Resin?
- Why does epoxy crystalize?
- Can I get a Matte or Satin Finish when using Table Top Epoxy?
- How do I thin Epoxy for certain applications?
- My Epoxy is Sticky/Tacky, What Do I Do?
- Can you measure Part A and Part B tabletop epoxy by weight?