Due to the potential to cause additional problems when buffing / polishing we recommend lightly scuffing the entire surface, wiping the surface clean with a drop of denatured alcohol or acetone, and then pouring a new flood coat per our instructional guide
Although not officially recommended we do have customers who use the following method to buff / polish the surface. First a progressive dry sanding method is employed starting with 200 grit then 300, 400, 1000, 2000. Wipe the surface clean of sanding debris with a drop of denatured alcohol and then apply a polishing compound ( 3M Finesse it II ).
PLEASE NOTE : Polishing epoxy can lead to smearing. It is crucial that speed and pressure are minimal so as to avoid smearing the epoxy. The finished result should be a barely perceptible dulling of the original finish.
Comments
1 comment
Does this have an odor, smell?
Article is closed for comments.